INC 1450 Drill Pipe Corrosion Inhibitor Concentrate is formulated for low-solids drilling fluids, brine water systems, and air mist drilling. It reduces pitting corrosion caused by dissolved oxygen and is well-suited for calcium-rich environments. It is an anodic inhibitor that can be used as-is or diluted.

Functions: Corrosion Inhibitor

Chemical Family: Organophosphates, Phosphate Esters, Phosphorous-based Compounds

End Uses: Drilling Fluids

Applicable Processes: Drilling Applications

    Technical Data

    Identification & Functionality

    Applications & Uses

    Markets
    Applications
    Applicable Processes
    Industrial Additives End Use
    Use Level
    500 ppm
    Usage Information
    • INC 1450 may be diluted and winterized by blending 20% ethylene glycol and 30% water into the product.
    • Alcohol should not be used in this dilution.
    • This suggested formulation will provide a product that is winterized to -20 °F.
    • INC 1450 may be effectively used without dilution.
    • Typical recommended use concentrations are 500 ppm. of INC 1450, to effectively reduce pitting attack by dissolved oxygen.
    • A good rule of thumb is to add 2.5 gallons of INC 1450 for every 100 barrels of make-up fluid.
    • This will ensure that 500 ppm. of inhibitor are present in the system.

    Properties

    Physical Form
    Soluble In
    Physical Properties
    ValueUnitsTest Method / Conditions
    Specific Gravity (at 60°F)1.122--
    Flash Pointmin. 200°F-
    Pour Point-20°F-
    Density9.343Ibs/gal-
    pH Value6.5 - 7.5--
    Ionic ChargeAnionic--